Weldtone UV Curable Adhesives offer good toughness,high bonding strength and excellent reliability to a variety of materials,mainly applied in bonding reinforcement, waterproof sealing and components protection for intelligent electronic products and are especially suitable for high-speed automated assembly lines.
UV curable adhesives Series | |||||||
---|---|---|---|---|---|---|---|
Product Name | Appearance | Description | Viscosity (cPs@25℃) | Hardness | Tensile Strength(Mpa) | Elongation(%) | More parameters |
EN1903LV | Transparent Blue | UV/Heat dual curing
Apply for FPC component protection
Excellent SIR reliability
Suit for both dispense and spray
|
7,200 | D55 | 200.0 | 300.0 | Detailed introduction |
UV1025 | Transparent | UV curing
Design for UV transfer printing process
Good heat and water resistant
High hardness
|
1,100 | D84 | / | 60.0 | Detailed introduction |
UV8001 | Black | Moisture and heat resistant
Suitable for bonding various substrates
light blocking
|
13,500 | D40 | 7.7 | 159.0 | Detailed introduction |
CB1106 | Black | High aspect ratio after dispensing
UV/Heat dual curing
Low heat curing temperature
Excellent adhesion
Good performance in RA
|
60,000 | / | 19.0 | 49.0 | Detailed introduction |
EN1008 | Light Yellow | Fast curing at LED365nm
Good adhesion to PI substrate
Excellent flexibility
Moderate modulus
Excellent resistance to water permeation
|
700 | D40 | 17.5 | 282.0 | Detailed introduction |
UV8902F | Blue | UV/Moisture dual curing
High UV curing efficiency
High bonding strength
Excellent reliability
|
6,600 | D82 | 34.9 | 5.8 | Detailed introduction |
UV4219 | Transparent Green | Moisture and heat resistant
Suitable for bonding various substrates
Low electric constant
|
10,070 | D48 | 10.5 | 272.0 | Detailed introduction |
UV4218 | Transparent Blue | Moisture and heat resistant
Suitable for bonding various substrates
Low electric constant
|
10,070 | A60 | 2.7 | 202.0 | Detailed introduction |
UV4217WR | Transparent | Fast curing
Good bonding strength
Good flexibility with FPC PET
Moisture and heat resistant
|
2,990 | A65 | 2.7 | 202.0 | Detailed introduction |
UV4217C | Transparent | Fast curing
Good bonding strength
Good flexibility with FPC PET
|
2,883 | A37 | 1.5 | 210.0 | Detailed introduction |
UV4217 | Transparent | Fast curing
Good bonding strength
Good flexibility with FPC PET
|
2,642 | A57 | 16.3 | 180.0 | Detailed introduction |
UV4082 | Black | Fast curing
Excellent light blocking performance with LCD screen
Reworkable , HALT resistance
|
2,400 | D42 | 8.8 | 198.0 | Detailed introduction |
UV4020 | Transparent | Fast curing
High elongation
Easy peel-off from different substrates
Moisture and chemical resistant
|
45,000 | A35 | 1.1 | 497.0 | Detailed introduction |
UV4011 | Transparent | Fast curing
High elongation
Easy peel-off from different substrates
Moisture and chemical resistant
|
45,000 | A35 | 1.1 | 497.0 | Detailed introduction |
UV4018 | Transparent Blue | Fast curing
High elongation
Easy peel-off from different substrates
Moisture and chemical resistant
|
13,890 | A30 | 3.0 | 488.0 | Detailed introduction |
UV4634LV | Transparent | Suitable for bonding camera modules LCP, metals, glasses
High bonding strength
High Ti ,Low VOC
Fast curing and middle viscosity for fast flow application
|
1,800 | D55 | 15.6 | 57.0 | Detailed introduction |
UV4634HV | Transparent Blue | Fast curing
High bonding strength
High Ti
|
10,000 | D55 | 17.0 | 234.0 | Detailed introduction |
UV8959 | Blue | UV/Moisture duble curing
High bonding strength
Excellent reliability
|
10,800 | D70 | 15.2 | 36.0 | Detailed introduction |
UV4038 | Light Blue | Moderate viscosity
Moderate thixotropy
Fast curing
Can achieve overall tearing
Good compatibility
|
5,200 | A76 | 1.5 | 600.0 | Detailed introduction |
UV4634 | Transparent | Fast cure High bonding strength Good toughness |
11,000 | D70 | 14.0 | 155.0 | Detailed introduction |